4-26 System BIOS and Utilities
Save Custom Defaults
This option saves your changes to Custom default
settings.
Discard Changes
This option loads previous values from CMOS RAM for
all BIOS settings.
NOTE
If your system’s CMOS fails, the BIOS loads
custom default settings (if you saved them) or
factory default settings.
Finally, press
Enter
again to confirm and exit the Setup
program.
BIOS FLASH UTILITY
From time to time, changes are made to a computer
system’s BIOS. While not essential, it is usually beneficial
to upgrade if there is a new BIOS for your system. Check
the NECCSD Bulletin Board Service (BBS) for information
regarding an update to your system’s BIOS. If there is one
available, the BBS will have both the BIOS itself and
instructions for downloading it.
Update the BIOS from the BIOS flash diskette as follows.
1.
Write down the setup parameters currently set on your
system.
2.
Turn off the system.
3.
Insert the flash upgrade diskette in drive A and turn on
the system.
