NEC POWERMATE PROFESSIONAL 9000E - SERVICE, Руководство по обслуживанию

Страница: 179 / 206

A-4 Release Notes
7.
Click
Add
. The Select Network Protocol window appears.
8. Highlight
TCP/IP
and click
OK
. The TCP/IP Setup window appears. If there
is a DHCP server on the network, click
Yes
; otherwise click
No
.
9.
Change the path in the window to C:\I386 . Click Continue . The Network
window appears. If Yes was clicked in step 8, skip to step 16. If No was
clicked in step 8, the Windows Setup window appears.
10. Click
Close
. The Microsoft TCP/IP Properties Box appears.
11. Fill in the
IP Address
, the
Subnet Mask
, and the
Default Gateway
in the
“Specify an IP address” area.
12.
Click the
DNS
tab and enter the host and domain name in the DNS display.
13. Click the
Identification
tab and change the Computer Name if appropriate.
14. Click the
WINS
tab and enter the WINS address if appropriate.
15. Click the
Routing
tab and enable IP forwarding if appropriate.
16. Click
OK
. When prompted to restart the system, click
Yes
.
Using Cheyenne Backup
The following notes describe conditions and procedures specific to systems
running the Cheyenne Backup.
Backing Up Large Drives
When Cheyenne Backup is set to automatically back up a drive to a network
drive, and the system drive being backed up is greater than 2.l GB, multiple
instances of the Copy program may be launched, according to how many drive
letters are assigned to the hard drive. The first instances end with an indication
that no data was transferred. The last instance completes the backup
successfully.
Windows NT Issues
The following information is specific to systems running the Microsoft
Windows NT 4.0 operating system.
Rebooting the System After Installing Internet Explorer 4.0
After Internet Explorer 4.0 has been installed from the NEC Select Install CD,
do not remove the CD until the reboot sequence has begun (anytime following
the screen clear, but before the system begins to boot from the CD).