NEC PowerMate CT, Руководство пользователя, Страница: 116 / 181

Installing Options 4-35
Storing and Retrieving Unused Rails
The device rails on the 5 1/4-inch devices are designed specially for the
chassis. If your system has an unused 5 1/4-inch bay, there should be rails
stored within it. Use these rails on new devices (if necessary). If you
remove an old device, remove the rails and store them. If there is an
empty 5 1/4-inch bay, store the rails in the chassis; otherwise set the rails
aside for future use.
To store a rail in an empty bay, follow these steps.
1.
Position the end of the rail in the guides within the bay. The
underside of the rail should be to the wall of the bay. The tab should
be angled away from the center of the bay (see the following figure).
Storing an unused rail
A – Front of Chassis C – Tab at End of Rail
B – Device Rail
2. Press the rail against the wall of the bay with your thumb and press
the tab toward the center of the bay with your forefinger.
3. Slide the rail along the guides until its tab clicks in place.
4. Place a bay cover over the empty bay (see “Replacing a Bay Cover”).
To retrieve a rail from an empty bay, follow these steps.
1.
Press the rail against the wall of the bay with your thumb while you
press the tab toward the center of the bay with your forefinger.
2.
When the tab releases, slide the rail out along the guide.