NEC PowerMate CT, Руководство пользователя, Страница: 101 / 181

4-20 Installing Options
Removing a RIMM module
A – Plastic Clip (2) B – RIMM Module
Installing a RIMM or Continuity Module
Use the following steps to install a RIMM module or continuity module.
1. Remove the cover (see “Removing the Cover” earlier in this chapter).
2.
If you need to remove a currently installed RIMM or continuity
module, see “Removing a DIMM or Continuity Module” earlier in
this chapter.
Before you install a module, reduce static
discharge by touching the chassis.
3.
Grasp the new module in the middle and align the notches on the new
module with the keys in an empty RIMM socket (see the following
figures).
4.
Press the module firmly into the socket.
5.
Make sure the plastic clips at both ends of the module click closed.