2-8 Setting Up the System
2.
Remove all removable media from your drives, including CDs,
DVDs, CD-RW discs, diskettes, Zip disks, and tape cartridges.
3.
Turn off the system unit and any external options connected to it.
4.
Unplug the system unit power cable from the wall outlet or surge
suppressor, then from the unit itself.
5.
Unplug any external options from the wall outlets or surge
suppressor, then disconnect them from the system unit.
6.
Pack the system components in the original shipping materials and
cartons. If these are not available, be sure to use adequate packing
materials to protect the components.
To set up your system, follow the steps on the PowerMate CT 815 Quick
Setup poster that comes with the system.
More Information
Once you have your system up and running, we suggest that you do the
following:
!
Install applications provided by NECC.
!
See “Setting Up a Healthy Work Environment” in Appendix A.
!
Install any of your own applications. See the documentation that
comes with the application.
See the following quick reference chart to find information about using
the system.
