NEC PowerMate 466M, Руководство по обслуживанию

Страница: 51 / 184

Setup and Operation 2-21
Exit Menu
Selecting “Exit” from the menu bar displays the following exit options:
n
Save values & Exit
n
Discard values & Exit
n
Get Default Values
n
Load Previous Values
n
Save Current Values.
The following sections describe each of the options on the Exit Menu. Note that
Esc
does
not exit this menu. Select one of the items from the menu or menu bar to exit.
Save Values & Exit
After making the selections on the Setup menus, always select Save to make them opera-
tive.
Unlike standard RAM memory, NVRAM is sustained by an onboard battery when the sys-
tem off.
After saving the selections, the program displays this message:
Changes have been saved
Press <space> to continue
A prompt appears if attempting to exit without saving,
During bootup, Setup attempts to load the values saved in NVRAM. If the values saved in
NVRAM cause the system boot to fail, reboot and press
F2 to enter Setup. In Setup, the
default values (as described below) can be loaded or change the values that caused the boot
to fail.
Discard Values & Exit
Use this option to exit Setup without recording any changes.
Get Default Values
To load all the default Setup values in the Setup menus, select Load ROM Default Values
from the Main Menu. The program displays this message:
Default values have been loaded
Press <space> to continue