Minitower Repair 6-15
Figure Section 6-14 Left Side Device Screw Access Holes
4.
Remove the 3 1/2-inch hard disk drive out from inside the chassis.
5 1/4-Inch Device Removal
Remove a 5 1/4-inch device from the 5 1/4-inch device cage as follows.
1.
Remove the top cover as previously described.
2.
Unplug all signal and power cables from the device(s) in the 5 1/4-inch device
cage (see Figure Section 6-13).
3.
Remove the four 5 1/4-inch hard disk drive screws; two on each side.
The two right side 5 1/4-inch hard disk drive shown in Figure Section 6-13. The
two left side 5 1/4-inch hard disk drive screws shown in Figure Section 6-14.
4.
Remove the device out of the 5 1/4-inch device cage from the front of the system
unit.
5 1/4-Inch
Drive Screw
Access Holes
2 of 4
Disk Drive Screws
3 1/3-Inch Hard
(not shown)
Содержание PowerMate 466M
Страница 10: ...Contents xiii ...
Страница 176: ...Connector Pin Assignments A 15 ...