NEC PG-FPL, Руководство пользователя, Страница: 6 / 102

6
Preliminary User’s Manual U17271EE1V0UM00
Conventions Symbols and notation are used as follows:
Weight in data notation : Left is high-order column, right is low order column
Active low notation : xxx (pin or signal name is over-scored) or
/xxx (slash before signal name)
Memory map address: : High order at high stage and low order at low stage
Note : Footnote for an item marked with Note in the text
Caution : Information requiring particular attention
Remark : Supplementary explanation
“ “ : Any character or item on the screen
OK : Name of button
[ ] : Menu
< > : Dialog box name
Numeric notation : Binary . . .
XXXX
or
XXX
B
Decimal . . .
XXXX
Hexadecimal . . .
XXXX
H or 0x
XXXX
Prefixes representing powers of 2 (address space, memory capacity)
K (kilo): 2
10
= 1024
M (mega): 2
20
= 1024
2
= 1,048,576
G (giga): 2
30
= 1024
3
= 1,073,741,824
Terminology The meanings of the terms used in this manual are as follows:
Note: The FA adapter is a product of Naito Densei Machida Mfg. Co., Ltd.
If you have any questions about the FA adapter board, contact your local NEC sales
or Distributor.
Term Meaning
FPL
Abbreviation of the on-chip flash memory microcontroller programmer
PG-FPL
GUI software Windows application used to operate the PG-FPL by using GUI
Target device NEC Electronics on-chip flash memory microcontroller
Target system
User-designed board on which an NEC Electronics on-chip flash
memory microcontroller is installed
FP4 connector Abbreviation of a PG-FP4 target connector (type A)
FA adapter
Adapter board used to write programs to an NEC Electronics on-chip
flash memory microcontroller (FA adapter board)
Note