NEC PG-FPL, Руководство пользователя, Страница: 56 / 102

56
Chapter 4 Using The GUI Software
Preliminary User’s Manual U17271EE1V0UM00
(5) [Security] command
This command is not supported.
(6) [Checksum] command
The [Checksum] command reads the checksum value of the target device connected with the
FPL.
This value differs from the value displayed in the parameter window of the main window.
(7) [Autoprocedure (EPV)] command
(8) [Signature read] command
The [Signature read] command reads the signature information (device name, flash memory infor-
mation, and so forth) of the target.
The [Autoprocedure (EPV)] command executes the [Erase] command and [Program] com-
mand in succession.
When a user program is to be resent to the target device for comparison with the data writ-
ten to the flash memory of the target device because of a user program communication
error, execute the [Program] command by selecting [Device]
→
[Setup] and specifying
'Command options' on the Advance tab, then set the automatic execution of the [Verify]
command.
During EPV execution, the progress status is displayed in the action log window to indicate
programmer operation. For a selected command, its execution operation, and messages,
refer to Chapter 5
Example of Use.
Upon completion of [Autoprocedure (EPV)] command execution, the GUI software displays
the result of executing the command on the target device.