31
7. NETWORK SETTINGS
HTTP server configuration
Set the password for logging into the PROJECTOR CONTROL screen. A maximum of up to 10
alphanumeric characters can be set for the password.
PJLink setting
Set the login password for using PJLink. A maximum of up to 32 alphanumeric characters can be set for the pass-
word.
Alert e-mail setting
When using this device connected to a network, computers and other devices will be notified of the status of this
device via e-mail if the lamp of this device is due for replacement, or if an error occurs.
ALERT MAIL
This option will notify your computer of lamp replace time or error messages via
e-mail when using wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME : PJ-XXXXXXXX
LIGHT HOURS USED : XXXX[H]
SENDER’S ADDRESS
Enter sender’s address.
SMTP SERVER NAME
Enter the SMTP server name to be connected to the projector.
RECIPIENT’S ADDRESS 1, 2, 3
Enter your recipient’s address. Up to three addresses can be entered.
TEST MAIL
Send a test mail to check whether your settings are correct or not.
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if
network settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should
this happen, check if the Recipient’s Address is correct.
CRESTRON SETTINGS
Configure the settings for connecting this device to a CRESTRON product.
Item
Description
ROOMVIEW
Check this when controlling the unit with a computer.
CRESTRON CONTROL
Check this when controlling the unit with a controller.
IP address
Set the IP address of the controller.
IP ID
Set the IP ID of the controller.
