NEC NX7700i/5080H-32, Руководство по эксплуатации

Страница: 88 / 170

Base Module
855-900547-200 2-52
cmd arg1 arg2 arg3 arg4 Description
- - - - Use this command to manually inform the
iSP of an addition of components. iSP’s
management state will change from
“nonexist.” to “power-off.”
If no argument is specified or an argument
has an error, the add command help opens.
This command is always valid without regard
to the current system state (with the
exception of the PBAY, to which this
command is valid only if none of the
partitions is active).
This command is not valid to the CELL
Cards, XBX Cards, PCI Bay, or their
subcomponents if any of the partitions within
the system is booting up, shutting down, or
handling an error.
pbay x - - - Add Power Bays.
x is a Power Bay number. The allowable
value of x is as follows:
For 32Way:
0, 1: Power Bay No. in the Main Cabinet
2, 3: Power Bay No. in the Expansion
Cabinet
For 8Way:
0: Power Bay No. inside the chassis
1: Power Bay No. outside the chassis
For ISPF:
0: Power Bay No. inside the chassis
add
dps xy - - - Add DPS’s to Power Bays.
The meaning of
x is identical to that for
argument pbay.
y is a DPS No. within a Power Bay (0-5).
isp x - - - Add backup iSPs.
x is the physical number of an iSP (0 or 1).
Backup iSPs can only be added to the
32Way model.
clk x - - - Add CLK Cards.
x is the physical number of the CLK Card (0
or 1).
The CLK Card can only be added to the
32Way model.
xbxc x - - - Add XBX Cards.
x is an XBX Card number (0-3).
The SP will automatically recognize the
number of XBX LSI chips installed on the
XBX Card.
cell x - - - Add CELL Cards.
x is the physical number of the CELL Card
(0-7).
proc xy - - - Add processors.
x is the physical number of the CELL Card
(0-7).
y is the location of the processor on the
CELL Card (0-3).