NEC NVM-CA Series, Руководство по интеграции

Страница: 64 / 266

Toshiba Strata DK280
60
X
Integration Notes Issue 1-0
Voice Mail Programming (cont’d)
Default Dial Action Table
The extension number for a TRF or UTRF – a specific extension or XX – must be placed in
brackets followed by a “1.”
Key Routing Option
Key 0 Action: UTRF
Number: [200]1
Key 1 Action: UND
Number: N
Key 2 Action: TRF
Number: [XXX]1
Key 3 Action: TRF
(See Note below) Number: [XXX]1
Key 4 Action: TRF
(See Note below) Number: [XXX]1
Key 5 Action: UND
Number: N
Key 6 Action: UND
Number: N
Key 7 Action: UND
Number: N
Key 8 Action: UND
Number: N
Key 9 Action: HUP
Number: N
Key * Action: REC1
Number: IV
Key # Action: LOGON
Number: N
TIMEOUT Action: UTRF
Number: [200]1
Note:
When the phone system is integrated with a NVM-2000CA (with a software level of 8.01 up to 9.10), NVM-22CA, or
NVM202exCA, the default values for the Actions and Numbers of Key 3 and Key 4 are UND and N, instead of the
values listed in the Dial Action Table above.
Other Notes
Call Forwarding to a Mailbox is allowed when Automated Attendant transfers are set up for either
screened or unscreened transfers. But be sure that the phone system timers are set up, so that they
do not conflict with the setting for the Rings before redirect transfer in the Call Routing mailbox.