NEC NVM-CA Series Скачать руководство пользователя страница 57

Страница: 57 / 266

Toshiba Strata DK24/56/96

Issue 1-0

Integration Notes

Toshiba Strata DK24/56/96

Integrati on Notes

Required Hardware and Software

To be provided

Voice Mail Availability

This phone system is available on these Voice Mail systems:

NVM-22CA with software version 8.01 or higher

NVM-202exCA with software version 7.01 or higher

NVM-2000CA with software version 8.01 or higher

Phone System Programming

Program 10-1 - System Assignments

Ring Transfer, LED 07 - Enable (LED on)

Program 10-2 - System Assignments

•

DTMF Tone Return, LED II - Enable (LED off)

•

Voice Mail ID Code, DTMF Signal Time, LED 06 - Set for 80ms (LED on)

•

Voice Mail MW Cancel via Dial #64/Automatic, LED 04 - Enable (LED on)

Program 12 - System Assignments / Basic Timing

Flash Timing, Code 4 - Set @ 0.5 seconds

Program 13 - Defining the Message Center

Assign lowest number Voice Mail port to Message Center

Program 15 - Assigning DP/DTMF

Auto-Release (AR) on VM calls, Code 0 - Enable for all CO lines

Program 31 - Station Class of Service

For VM Ports:

•

Toshiba VP (B + Sta #), LED 20 - Enable

•

Toshiba VP (B, No Sta), LED 19 - Enable

•

End/End Signal RCV (VM), LED 17 - Must enable

•

Receive VM ID Code, LED 16 - Enable

•

Toshiba VP Integration (A Tone/D), LED 15 - Enable

•

VM No Conference, LED 09 - Enable (LED on)

•

VM Groups 1 - 4, LED 05-08 - Put all VM ports into group 1, LED 05 (LED 05 on).

•

VM to VM Call blocking, LED 04 - Enable (LED on)

•

Executive and Privacy Override Blocking, LED 18 -Enable (LED on).

Program 33 - Station Hunting

All VM ports must be set up in a hunt group.

Program 35 - Station Class of Service

•

Busy Station Transfer (BST), LED 20 - Enable for VM ports.

•

Busy Station Ringing (BSR), LED 19 - Enable for all non-VMstations.

•

Msg. Waiting Receive (RCV), LED 04 - Enable for all non-VM stations.

Note:

LEDs 01, 02 & 04 must be on for all non-VM stations in order for Msg. Waiting to function.

Program 40 - Station CO Line Access

When callouts, Message Notification, etc. are required, use this program to allow VM ports
access to CO lines.

Содержание NVM-CA Series











































































































































































































































































Результаты поиска

Содержание NVM-CA Series

Отзывы:

Бренды по названию

Популярные бренды

NEC NVM-CA Series, Руководство по интеграции

Результаты поиска

Содержание NVM-CA Series

Отзывы:

Бренды по названию

Популярные бренды