NEC NRS Expanded Series, Руководство по настройке

Страница: 165 / 280

ISSUE 1.0
NVR Configuration Guide (Advanced) for NRS Expanded Series 8-13
6.4 Notify Surveillance Center
You can set a notification that sends an exception or alarm signal to a remote
alarm host when an event occurs. The alarm host refers to the PC installed with
Remote Client.
6.5 Email Linkage
When an alarm is detected, an Email containing alarm information can be sent to
the user(s). Refer to
Chapter 11, 2.8 Configuring Email on page 11-16
configuration.
6.6 Trigger Alarm Output
You can assign alarm output when an alarm is triggered.
1. Access the Alarm Output screen:
Menu -> Configuration -> Alarm -> Alarm Output
Select an alarm output and set the Alarm Name and Dwell Time . Click
Schedule to set the arming schedule for the alarm output.
2. Set the arming schedule for the alarm output.
Choose one day of the week. A maximum of eight time periods can be set
for each day.
NOTE

In detection mode, an alarm signal is transmitted automatically when the
remote alarm host is configured.
NOTE

If ‘Manually Clear’ is selected in the dropdown list for Dwell Time,
it can only be cleared by accessing Menu -> Manual -> Alarm.
Figure 8-16 Alarm Output Setup Screen
NOTE

Time periods can not be repeated or overlapped.