24
2. Projecting an Image (Basic Operation)
Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER1/COMPUTER2/COMPUTER3)
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (
→
page
94
,
95
)
Turning Up or Down Volume
Sound level from the speaker can be adjusted.
TIP: When no menus appear, the
and
buttons on the projector cabinet work
as a volume control.
NOTE:
• Volume control is not available with the
or
button when an image is enlarged
by using the D-ZOOM (+) button or when the menu is displayed.
• Volume control is not available with the
or
button when VIEWER or NET-
WORK is used.
Increase volume
Decrease volume
Содержание NP-PA550W
Страница 235: ...NEC Display Solutions Ltd 2011 7N951591...