manualshive.com logo in svg

NEC NEFAX655e, Руководство пользователя

Поделиться
Скачать
NEC NEFAX655e Скачать руководство пользователя страница 152

Clearing Paper Jams

7 - 5

Maintenance & Supplies

Paper Jams

When a paper jam occurs, the message ‘RECORDING PAPER JAM” appears in 
the LCD Display.

1

Press the Cover Lock Release Buttons on 
the left and right side of the Printer 
Cover, and swing open the Cover.

Note:  The area directly below the 
Document Feed Tray is where the 
Fuser is located. It can be hot and you 
should avoid touching it.

2

Remove the used Toner Cartridge from 
the fax machine.

3

Remove the Drum Cartridge from the 
fax machine.

Note:  Whenever the Drum Cartridge 
is removed from the fax machine, be 
sure to cover it with a cloth to protect 
it from light.

4

Check the paper feed area, the paper exit area, and the area under the Drum 
and Toner Cartridges for paper. Continue with one of the following 
procedures to remove the jam.

Содержание NEFAX655e











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды