NEC NEAX 2000 IVS, Руководство по управлению

Страница: 284 / 473

ND-45669 (E) CHAPTER 3
Addendum-002 Page 247
JANUARY, 1999 Revision 2.2
CM74
COMMAND CODE
TITLE:
STORED NUMBER FOR STATION SPEED DIALING
74
MAT
4. DATA TABLE:
1. MEMORY SLOT NUMBER =1000-Slot Memory Block number (0-4, 8-F) + 10-Slot Mem-
ory Block number (00-99) + Memory Parcel number (0-9)
For example, an entry of “3428” represents: 1000-Slot Memory Block number 3
+
10-Slot Memory Block number 42
+
Memory Parcel number 8
2. STORED NUMBER = Access Code + Separator Mark + Number
• Access Code: C.O. line/Tie line Access Code (maximum of two digits)
• Separator Mark: to be inserted between the Access Code and Stored Number
• Number: C.O. network subscriber number or station number in the distant PBX
• maximum of 16 digits for 1000-Slot Memory Block Number 0-3
(CM08-252=1)
• maximum of 26 digits for 1000-Slot Memory Block Number 0-3
(CM08-252=0)
• maximum of 26 digits for 1000-Slot Memory Block Number 8-F
1. FUNCTION:
This command is used to enter the stored number, for the Station Speed Dialing feature, into the memory
allocated with CM73.
2. PRECAUTION:
(1) The stored number, exclusive of any access code, can be a maximum of 16 digits or 26 digits.
(2) Data can only be changed when the access code is displayed. Enter the data in the following order:
the new access code, comma, the called number, and
. For clearing the data, enter the data in
the following order: the access code on the display, comma, “CCC” and .
(3) This command is included in the MAT mode menu “E11” (Speed Dialing [COM02]).
3. ASSIGNMENT PROCEDURE:
EXE
EXE
ST
MEMORY SLOT
DE + 74 + + + DE
(Max. 16 digits/26 digits)
STORED NUMBER
+ + EXE NUMBER
( 4 digits)
,
[CM74] Stored Number for Station Speed Dialing