NEC NEAX 2000 IVS, Руководство по управлению

Страница: 140 / 473

ND-45669 (E) CHAPTER 3
Page 115
Revision 2.0
CM16
COMMAND CODE
TITLE:
CALL PICKUP GROUP/GROUP DIVERSION GROUP
16
MAT
4. DATA TABLE:
Y STATION NUMBER (A) SETTING DATA
No. MEANING DATA MEANING DATA MEANING
0 Assignment of Station
Numbers to be included
in a Call Pickup Group X
XXXX
Station Numbers (A) X
XXXX
Station Number (B)
When assigning station numbers to a Call Pickup Group, only two station
numbers can be assigned per operation. Thus, by repeating the operation as
often as required, all the station numbers to be included in a Call Pickup
Group can be assigned. The two station numbers to be assigned by one op-
eration are defined as Station Number (A) and Station Number (B).
For example, when defining a Call Pickup Group with Station Numbers 300,
301, and 302, three operations are performed.
Station Number (A) Station Number (B)
1st Operation 300 301
2nd Operation 301 302
3rd Operation 302 300
By these three operations, a chain of three lines is set up. As seen above,
one station can be either Station Number (A) or Station Number (B). Thus,
Station Number (A)/(B) is used for identifying which of the two station
numbers is to be set first.
2
(CF-DA
SYS
STA)
Assignment of Station
Number to be included
in Group Diversion X
XXXX
Station Numbers to be
included in Group Di-
version 00
30
Group Diversion Group 00
Group Diversion Group 30
(See CM19 Y = 6)
3 Display of Station Num-
bers included in a Call
Pickup Group By entering a Station Number as the first data, the station numbers included
in the Group are displayed by depressing the key.
OPERATION DISPLAY
1st STN A + STN A: STN B
2nd + STN B: STN C
3rd + STN C: END
~ ~
~ ~
~
DE
DE
DE
DE