NC800C
4. Projector Adjustment
E-33
[3]
Loosen the anamorphic lens
setscrew (hexagon head screw)
and turn the lens unit so that the
vertical and horizontal lines of the
center of the image projected
become perpendicular and level.
(To prevent the anamorphic lens from
coming off, be sure to hold the lens while
loosening the setscrew.)
3
[4]
Loosen each of the two
y-direction setscrews of the
anamorphic lens holder and
turn the y-direction adjusting
knob on the top to adjust the
lens position so that the
image is projected through
the center of the anamorphic
lens. Securely tighten the two
setscrews after adjustment.
a, c
b
4
