NC800C
4. Projector Adjustment
E-30
When shipped from the factory, it is set to [Normal-F].
- Normal-F:
Front projection. With the projector installed on the pedestal, projection is
executed from the front of the screen.
- UpsideDown-F: The projector body is installed upside down, and projection is made from front
of the screen.
- Normal-R:
Rear projection. With the projector installed on the pedestal, projection is
executed from the back of the screen.
- UpsideDown-R: The projector body is installed upside down, and projection is made from
behind the screen.
[7]
Press the “ENTER” button.
An (*) will be put on the selected projection method (Image Orientation).
[8]
Press the “EXIT” button several times.
The projector exits the menu and goes back to the regular screen.
4.2
Adjusting the primary lens
Display the test pattern and adjust the screen size, focus and screen position with the
primary lens.
4.2.1
Display the test pattern
[1]
Press the “MENU button” of the remote controller.
"Title Select" is displayed on the LCD screen at the projector side.
[2]
Press “ ” button.
[3]
Press the “ / ” buttons to select "TEST Pattern".
[4]
Press “ ” button.
[5]
Use the “ / ” buttons to select the "TEST Pattern name" which
it projects, and press “Enter” button.
An (*) will be put on the selected projection method.
To cancel the display of the test pattern, select the projection signal again or select “OFF” of the
test pattern.
