NEC N8551-28F, Инструкция по эксплуатации

Страница: 23 / 48

Built-in AIT 5
Setting SCSI ID
Set SCSI ID which is used by the Built-In AIT. Use four jumper pins, pin 0 to pin 3, on the rear of
the Built-In AIT.
Important
Check that the Built-In AIT’s SCSI ID is not duplicated with SCSI ID of other SCSI device.
SCSI ID Pin 3 Pin 2 Pin 1 Pin0
0
✕ ✕ ✕ ✕
1
✕ ✕ ✕ ❍
2
✕ ✕ ❍ ✕
3
✕ ✕ ❍ ❍
4 *1
✕ ❍ ✕ ✕
5
✕ ❍ ✕ ❍
6
✕ ❍ ❍ ✕
7
*2
✕ ❍ ❍ ❍
8
❍ ✕ ✕ ✕
9
❍ ✕ ✕ ❍
10
❍ ✕ ❍ ✕
11
❍ ✕ ❍ ❍
12
❍ ❍ ✕ ✕
13
❍ ❍ ✕ ❍
14
❍ ❍ ❍ ✕
15
❍ ❍ ❍ ❍
❍
: With strap
✕
: Without strap
*1
: Factory-set value
*2 : Do not set SCSI ID to ID7.
Pin 3 (Factory-set to “Without strap”)
Pin 2 (Factory-set to “With strap”)
Pin 1 (Factory-set to “Without strap”)
Pin 0 (Factory-set to “Without strap”)