NEC N8551-28F, Инструкция по эксплуатации

Страница: 20 / 48

2 Built-in AIT
Front
Part Name and Function
The Built-In AIT and magazine have the following parts and functions.
Important
The names and functions of each part of the N8551-28F and the N8151-44F and the setup
methods are identical. (Hereafter, the N8151-28F is used for the illustrations in this manual.)
➀
Data cartridge slot
A slot in which the AIT cartridge is set
(
→
P. 14)
➁
Ventilation holes
(The N8151-44F does not have
ventilation holes.)
➂
EJECT button
Press this button when ejecting the
AIT cartridge from the Built-In AIT.
(
→
P. 15)
➃
STATUS LED
An LED which shows the Built-In AIT
status. (
→
P. 16)
➄
TAPE LED
An LED which shows the status of the
AIT data cartridge (
→
P. 16)
➅
BUSY LED
An LED which shows the data
communication status (
→
P. 16)
Rear
➀
Fan
➁
Power connector
Connect the Built-In AIT’s built-in
power cable. (
→
P. 9)
➂
Jumper pin
Pins which set the Built-In AIT
(
→
P. 4)
➃
SCSI connector
Connect the Built-In AIT’s built-in
SCSI cable. (
→
P. 9)
➀
➄ ➅ ➃ ➂ ➁
➀
➂ ➁ ➃