1. Installing Internal Optional Devices
Express5800/T110g-E User’s Guide
90
Chapter 2 Preparations
Hold the tray firmly and pull it toward the front.
3.
Note
Do not pull the handle to remove the hard disk drive.
Doing so may damage the handle.
Important Do not use this server while removing the hard disk drive.
Removing the 2.5-inch HDD cage
1.12.9
Remove the 2.5-inch HDD cage from the server by using the following procedure.
See steps 1 to 3 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
1.
To remove the side cover and front bezel, see
Chapter 2
2.
To remove the hard disk drives installed in the HDD cage, see
Chapter 2
3.
Disconnect the interface cable and power cable from the backplane installed in the HDD cage.
4.
Disconnect the interface cable from the motherboard or RAID controller.
5.
Remove four screws that attach the HDD cage.
6.
Remove the HDD cage from the server.
7.
