1. Installing Internal Optional Devices
Express5800/T110g-E User’s Guide
79
Chapter 2 Preparations
7. Connect the interface cables and power cable to the hard disk drive. Use the interface cables that
come with the HDD cage. For details about cable connection, see
Removing the 3.5-inch fixed hard disk drives
1.12.2
Remove the 3.5-inch fixed hard disk drives from the HDD cage by using the following procedure.
Important When disposing of the hard disk drives, follow the instructions described in
Chapter 1
(
1.2 Disposal of consumables and servers
) in the Maintenance
Guide.
See steps 1 to 3 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
1.
To remove the side cover and front bezel, see
Chapter 2
2.
Disconnect the power cable and interface cable from the hard disk drives.
3.
Press the part shown in the figure to unlock the HDD tray, and then remove the hard disk drive out
4.
from the HDD cage.
