1. Installing Internal Optional Devices
Express5800/T110g-E User’s Guide
61
Chapter 2 Preparations
Connecting the battery control cable
To connect the battery control cable into the battery pack, see the following figure. Check the form of
the connector and connect the cable straight into the connector.
Important When installing or removing the extra battery, pay attention not to apply excessive
pressure on the part of the battery cover marked in the image below.
Getting ready to install the battery
1. See
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. To remove the side cover and the front bezel, see
Chapter 2 (1.4 Removing the Side Cover
and
.
The upper portion is wider than that of lower portion.
