4. Names and Functions of Parts
Express5800/T110f-S User’s Guide
34
Chapter 1 General Description
Liquid cooling model
(1) POWER
Switch
The switch to turn the server on and off. Press once to turn
on the server. The LED lights green when it is on. Press it
again to turn off the server. Hold down the switch for 4
seconds or more to forcibly turn off, the server.
(2) POWER
LED
(green/amber)
After the power cord is connected, this LED lights amber
during initialization of system. This LED lights green when
the power is ON.
(3) Disk Access LED (green/amber)
This LED lights or flashes green when the internal hard disk
drive or optical disk drive is being accessed.
The LED lights amber if a hard disk drive error occurs in the
RAID system configurations except for an onboard RAID
configuration using 3.5-inch hard disk drives
(4) STATUS
LED
(green/amber)
This LED indicates the server status. It lights green when
the server is operating normally.
(5) USB Connectors (front)
These connectors are used to connect devices that support
the USB interface.
Blue connector: for USB 3.0
Black connector: for USB 2.0
(6) Front
Bezel
This cover protects the front part of the server.
(7) Stabilizer
To place the server vertically, install as shown in the above
figure
(8) Optical Disk Drive
Either of the following drives can be installed.
– DVD-ROM drive
– DVD SuperMULTI drive
The drive provides the following: an eject button to eject the
tray; an LED that indicates hard disk drive access; and an
eject hole to eject the tray forcibly.
(9) 3.5-inch Expansion Bay
The bay which can accommodate 3.5-inch device or extra
HDD cage.
(10) Key Slot
Bezel Lock Key can be inserted into Key Slot to lock Front
Door when a 2.5-inch HDD cage is installed.
(11) Front Door
Open this door to handle the 2.5-inch hard disk drives.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
