1. Installing Internal Optional Devices
Express5800/GT110e-S User’s Guide
49
Chapter 2 Preparations
1.5
Removing the Front Bezel
Remove the front bezel by using the following procedure.
1. Refer to steps 1 to 3 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. Release the three tabs on the front bezel (
) in the
direction of the arrow shown in the image and then
pull the front bezel forward slightly until it comes off
the frame (
).
Important If you pull the front bezel forward too much, you will break the lower hook.
Gently slide it to prevent damaging the equipment.
3. Slide the front bezel upward to release the hooks that
engaged with the three holes at the lower part of the
server and take it off the server.
