![background image](http://html1.mh-extra.com/html/nec/n8100-1793f/n8100-1793f_user-manual_4248334094.webp)
1. Installing Internal Optional Devices
Express5800/R120d-2M User’s Guide
94
Chapter 2 Preparations
6. Insert RAID Controller into the slot dedicated to RAID Controller.
7. Secure the RAID Controller bracket with two screws you have removed in Step 4.
8. Disconnect SAS/SATA cable from SATA connector on motherboard.
8-1 When four or less hard disk drives are installed:
Connect SAS/SATA cable removed in Step 9 to connector (Ports 0-3) on RAID Controller.
8-2 When five or more hard disk drives are installed:
Connect SAS/SATA cable removed in Step 9 to connector (Ports 0-3) on RAID Controller.
Connect SAS/SATA cable provided with the server to connector (Ports 4-7) on RAID
Controller.
Remove a single screw from server chassis, and remove battery tray for RAID Controller.
Connect another end of SAS/SATA cable that has been connected to connector (Ports 4-7)
on RAID Controller, to the connector on backplane.
Secure the battery tray for RAID Controller with a single screw.
9. Continue to install or remove internal optional devices, mount and connect the server, and turn it
on.