![background image](http://html1.mh-extra.com/html/nec/n8100-1429f/n8100-1429f_user-manual_4242032217.webp)
Troubleshooting 8-11
Error
code
Error message
Recommended Action
0B9B
Private I2C bus not responding.
0B9C
BMC internal exception.
0B9D
BMC A/D timeout error.
0B9E
SDR repository corrupt.
0B9F
SEL corrupt.
Turn off the power once and then on again
to start the server. If the error cannot be
corrected, contact your service
representative.
0BB0
SMBIOS – SROM data read error.
0BB1
SMBIOS – SROM data checksum bad.
Contact your service representative.
8100
Memory Error detected in DIMM group #1.
8101
Memory Error detected in DIMM group #2.
8102
Memory Error detected in DIMM group #3.
8103
Memory Error detected in DIMM group #4.
8104
Memory Error detected in DIMM group #5.
8105
Memory Error detected in DIMM group #6.
Contact your service representative to
replace the DIMM in the relevant group.
8150
NVRAM Cleared by Jumper
Start SETUP and provide setting again.
8151
Password Cleared by Jumper
Start SETUP and set password again.
8160
Mismatch Processor speed detected on
Processor 1.
Contact your service representative.
None
Expansion ROM not initialized – PCI Mass
Storage Controller in slot n (n: slot number)
Disable initialization of the optional device
expansion ROM by using the BIOS SETUP
utility (see Chapter 4).
H/W Configuration of BMC is corrupted.
!! Update BMC F/W Configuration by
configuration tool !!
!! Refer to BMC configuration manual !!
Use the NEC EXPRESSBUILDER to
configure the remote management card
(see Chapter 6).
Содержание N8100-1429F
