23
Changing the battery
Make sure the phone is switched off. Some settings, stored numbers, and messages may be lost if the battery is
removed while the power is on.
1
Press down the rear cover.
2
Slide the rear cover about 8 mm in the direction indicated by the arrows.
3
Remove the rear cover.
4
Put the new battery into place in the direction indicated by the arrow, making sure that the tabs of the battery
fit properly into the notches in the phone.
5
Lower the battery towards the phone to lock into place.
6
Place the rear cover about 8 mm away from the end with the notches and slide the rear cover in the direction
indicated by the arrows until a click is heard.
Powering on the phone
Switching the phone on
Press and hold
key for at least two seconds to switch on.
The screen is either blank, displays an animation, or displays a greetings message during the powering on
process. After the powering on process, the phone displays the standby screen.
You may need to enter your PIN code or password.
Switching the phone off
Press and hold
key for at least two seconds to switch off.
5
4
Notches
Tabs
6
About 8 mm
Check that there is no gap
between the rear cover
and the phone body
1
2
3
About 8 mm
Rear cover
The greetings message
may not be as indicated if
any locks have been set or
the wrong SIM has been
inserted.
When you switch off and
switch on your phone, the
data in the phonebook list
and Messages folder will
take some time to initialise
before they can be properly
displayed.
