English−1
Cable Information
CAUTIONN:
Use the provided specified cables with this product so as not to interfere with radio and television reception.
For HDMI, USB, RS-232C and DisplayPort, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and television reception.
FCC Information
WARNINGN: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display
Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
SUPPLIER’S DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
U.S. Responsible PartyN:
NEC Display Solutions of America, Inc.
AddressN:
3250 Lacey Rd, Ste 500
Downers
Grove,
IL
60515
Tel. No.N:
(630) 467-3000
Type of Product:
Display Monitor
Equipment Classification:
Class B Peripheral
Model:
P435, P495, P555, MA431, MA491, MA551
•
The intended primary use of this product is as Information Technical Equipment in an office or domestic environment.
•
The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
(For Customers in U.K.)
IMPORTANT
• The wires in this mains lead are coloured in accordance with the
following code:
GREEN-AND-YELLOWN: “Earth”
BLUEN: “Neutral”
BROWNN: “Live”
• As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug proceed as follows:
• The wire which is coloured GREEN-AND-YELLOW must be
connected to the terminal in the plug which is marked by the letter
E
or by the safety earth symbol or coloured green or green-and-
yellow.
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter
N or coloured black.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter
L or coloured red.
• Ensure that your equipment is connected correctly. If you are in any
doubt consult a qualified electrician.
“WARNINGN: THIS APPARATUS MUST BE EARTHED.”
NOTEN:
(1) The contents of this manual may not be reprinted in part or whole without permission.
(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should you notice any questionable points, errors or omissions,
please contact us.
(4) The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product, the actual product
shall govern.
(5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using
this device.
(6) This manual is commonly provided to all regions so they may contain descriptions that are pertinent for other countries.
