NEC MOBILEPRO 900C, Руководство пользователя

Страница: 21 / 122

Getting Started 1-13
Before using the system for the first time,
allow 6 to 10 hours for the main battery to fully charge.
The battery charger has a built-in safety shutoff. You might need to
disconnect the AC adapter and reconnect it after about 3 hours of
charging to restart the charging process. If the battery charging LED is
green, check the battery charge by double tapping the Power icon in
the system tray. The main battery is fully charged when the
“Percentage of power left in main batteries” indicates 100%.
To protect your data, do not use the system until the battery is fully
charged
You must repeat this full 10-hour charge cycle only if the battery
becomes fully discharged.
Setting Up the System
This section takes you through the process of setting up your system
for the first time.
Note
Before you proceed, be sure you have installed the main
battery and the backup battery and you have connected the AC adapter
to charge your system.
1.
Open the display panel to start your MobilePro 900c for the first
time. Press the Power button if the system does not start
automatically.
2.
Follow the on-screen instructions to calibrate the touch screen.
Press
Ctrl Alt =
to recalibrate at any time.
3.
Tap Start, Settings, and Control Panel. Double tap the Owner icon.
Enter your name, company, address and telephone information.
Tap OK.
4. In Control Panel, double tap the Date/Time icon. Set the date. Set
the clock for your local time. Tap Apply. Tap OK.
5. Be sure to specify a country for modem use. For details, see
“Adjusting MobilePro Settings” in Chapter 4.