NEC LS2400, Руководство пользователя, Страница: 98 / 186

4-26 Upgrading Your System
Front Panel
The plastic front panel assembly is a one piece assembly. The
appropriate removable filler panels are attached to the corresponding
EMI shields. If you are installing peripheral devices in the external bays
above the 3.5-inch floppy disk drive, you must remove the front cover
along with the corresponding filler panel and EMI shield.
Removing the Front Panel
Note:
The front panel is secured with six locking tabs.
1. Power off the system and remove the side panels as described earlier
in this chapter.
2.
Remove the front panel by carefully pulling it off the front of the
system chassis. Use an even amount of pressure around the edges of
the panel.
Removing the Front Panel