NEC LC1400, Руководство по обслуживанию и справочник

Страница: 83 / 243

4-4 Upgrading Your System
n
Label all removed connectors. Note where the connector goes and in
what position it was installed.
n
On completion of any reassembly, plug in the power cords and power on
the system unit.
Contact your sales representative or dealer for a list of approved optional
peripheral devices.
Static Precautions
An electrostatic discharge (ESD) can damage disk drives, option boards, and
other components. You can provide some ESD protection by wearing an
antistatic wrist strap attached to chassis ground when handling system
components.
Electronic devices can be easily damaged by static electricity. To prevent
damage, keep them in their protective packaging when they are not installed in
your system.
Preparing Your System for Disassembly and
Reassembly
Depending on the upgrade, you will need one or more of the following tools:
n
Phillips screwdriver (#1 bit and #2 bit)
n
Flat-head screwdriver
n
Small needle nose pliers
n
Pen or pencil
n
ESD workstation or antistatic wrist strap (recommended)
Equipment Log
Use the equipment log form located at the end of this manual to record the
model and serial number of your system, all installed options, and any other
pertinent information specific to your system. You will need this information
when configuring your system.
Opening the Front Door
To open the front door (see "Front View with Front Door Opened" in
Chapter 2.)