NEC LC1400, Руководство по обслуживанию и справочник

Страница: 41 / 243

2-8 Setting Up the System
Getting Familiar with the System
Before setting up your system, you should become familiar with the system’s
features, such as the location of your system's front and rear panel switches,
indicators and connectors, etc. Note that this section describes the tower-based
system controls (switches and indicators) and connectors, which are identical for
the rack-mount system.
Note: :
To stabilize your system chassis, your system
comes with four chassis foot stands that are stored on the
bottom of the chassis skirt. Remove the four foot stands
from their storage receptacles and reinsert them into the four
holes provided in the chassis skirt. Position the server on a
flat surface so that it is stable and rests on all four foot
stands.
Front View with Front Door Closed
This figure shows the location of the front system features (tower-based system
only).
Front Features
A. System indicators (See "Front View with Front Door
Opened" later in this chapter).
B. Keylock When locked, secures the front door
not allowing access to the front system
controls.