![background image](http://html1.mh-extra.com/html/nec/express5800-t110g-s/express5800-t110g-s_user-manual_4015055065.webp)
1. Installing Internal Optional Devices
Express5800/T110g-S User’s Guide
65
Chapter 2 Preparations
Connecting the flash backup unit control cable
To connect the flash backup unit control cable into the flash backup unit, see the following figure.
Check the form of the connector and connect the cable straight into the connector.
Getting ready to install the flash backup unit
1. See
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. To remove the side cover and the front bezel, see
Chapter 2 (1.4 Removing the Side Cover
and
1.5 Removing the Front Bezel)
.
Installing the flash backup unit
1. Remove one screw from the front panel bracket.
2. Slide the front panel bracket slightly toward the right, and then pull the bracket toward the front to
remove it.
Important Be careful that the cable does not come out from the connector when pulling
the front panel bracket.