1. Installing Internal Optional Devices
Express5800/T110g-S User’s Guide
85
Chapter 2 Preparations
Installing the hard disk drive
1.12.6
Install a 2.5-inch hard disk drive in the server by using the following procedure.
Unlock and open the door of the 2.5-inch
1.
drive bay.
Install the hard disk drives in the HDD cage.
2.
Fully open the lever on the hard disk drive
tray, and then insert the hard disk drive until it
comes into contact with back of the HDD
cage (1).
When finished, close the lever to lock the
hard disk drive (2).
Important
Use only the hard disk drives provided by NEC.
If you remove two or more hard disk drives while the server is on, the
logical drive will be damaged. Remove or replace the hard disk drives one
by one.
Note
Make sure that the orientation of the hard disk drive (tray) before insertion is
correct. In addition, make sure that the hook of the lever engages with the frame of
the HDD cage when the lever is closed.
Close the door and lock it by using the key.
3.
1
2