3. Installing Windows Server 2019
Installation Guide (Windows Server 2019)
53
Chapter 1 Installing Windows
3.4.3
Installing Standard Program Package on Server Core
1. Sign-in to the Windows with an Administrators privilege.
2. Set the Starter Pack DVD to the drive.
3. From the command prompt, type the following command.
In the example below, the optical disk drive is the D drive.
cd /d D:\software\010\win\seamless
C:\Users\administrator>
cd /d D:\software\010\win\seamless
4. Type the following command, and then press <Enter> key.
instcmd.vbs spp /s
D:\software\010\win\seamless >
instcmd.vbs spp /s
5. If you had updated firmware beforehand, click
OK
to start the installation of Standard Program
Package.
Wait until installation completes (about 5 to 25 minutes).
Note
After installing a standard program package, the following message displays
and refers to
chapter 2 (2.2 Problem of OS)
.
iLO may be reset during applying Standard Program Package.
If iLO is reset, iLO remote console and iLO virtual media is disconnected.
When iLO remote console and iLO virtual media is disconnected, connect
again after 30 seconds or more.
