3. Installing Windows Server 2019
Installation Guide (Windows Server 2019)
50
Chapter 1 Installing Windows
3.4
Standard Program Package Installation
Standard Program Package (SPP) contains drivers customized for this server.
Make sure to install Standard Program Package before running the server system.
System reboot is required after applying Standard Program Package.
This program can apply using iLO remote console and iLO virtual media.
Important Make sure to update firmware by booting "Starter Pack DVD" before applying
Standard Program Package. If you mistake procedure, the system may not
start.
3.4.1
Before the installation
Confirm the next contents before applying Standard Program Package.
Sign-in to the Windows with an Administrators privilege.
(1)
Installing these drivers individually
When you use these options, refer to the following procedure to install these drivers individually from "Starter
Pack DVD" before installing SPP. SPP may be stopped with error if you do not install the driver beforehand.
Although the message indicated that the latest version has already been installed may be displayed, proceed
with the installation. After that, restart the server.
Devices/Options
Driver application modules in the Starter Pack DVD
When the R120h-1M / R120h-1M (2nd-Gen) /
R120h-2M / R120h-2M (2nd-Gen) / R110j-1 standard
network adapters or N8104-171/178/179 is installed
to the server
\packages\cp054662.exe
When N8103-189/190/191/192/193/194/195/196/197/
201/237/238 is installed to the server
\packages\cp055510.exe
(2)
Stopping Services of ServerAgentService
If ESMPRO/ServerAgentService is installed, stop following services from
Administrative Tools
-
Services
of control panel before applying Standard Program Package.
ESM System Management Service
ESMCommonService
(3)
Delete Folders
If
C:\cpqsystem
exists, delete that folder.
