![background image](http://html.mh-extra.com/html/nec/express5800-gt110e/express5800-gt110e_user-manual_251271101.webp)
2. Installation and Connection
Express5800/GT110e User’s Guide
101
Chapter 2 Preparations
2.2.1
Interface cables
First connect the interface cable and then the power cord.
Important
•
Turn off the server and peripheral devices to be connected before
connecting. Connecting wit power ON can cause malfunction or failure.
•
If connecting any peripheral device and its interface cable made by a third
party, contact the store where you purchased them to check if they can be
used with the server beforehand. Some devices from a third party cannot
be used with the server.
•
You cannot connect directly to the dedicated line through the serial port
that is equipped with the server as standard. To connect the dedicated
line, use a terminal device that is certified according to the
Telecommunication Business Law (a dedicated line means a dedicated
communication facility or other facility allocated to one specific user). It
includes a public line.)
•
The connectors that are not explained here are not used. Do not connect
anything to the connectors.
•
Be sure to use the display unit specified by NEC. The operation is not
guaranteed if you install a display unit not specified by NEC.