1. Installing Internal Optional Devices
Express5800/GT110e User’s Guide
49
Chapter 2 Preparations
1.7.3
Installation
Install a DIMM by using the following procedure.
1. Refer to steps 1 to 5 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. Hold the server with both hands and
slowly and gently lay it so that the left
side faces upward
3. Rotate both levers of the target DIMM slot outward.
4. Hold the DIMM vertically and push it all
the way into the slot.
When the DIMM is inserted into the slot,
the lever automatically closes.
Important Applying too much pressure on a DIMM or inserting a DIMM at an angle may
break the DIMM or slot. Gently insert it straight into the slot.
Note
Make sure the DIMM is oriented correctly. The terminal side of a DIMM has the
notch, preventing being incorrectly inserted.
5. Firmly close the lever.
6. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
7. Confirm that no error messages are displayed in POST screen.
If any error messages are displayed, refer to
Chapter 3 (1. POST Error Message)
in "
Maintenance
Guide
".
8. Run the SETUP Utility. Click on the
Advanced
menu, select
Memory Configuration
, and then
Memory Information
.
Confirm that the added DIMM has been recognized in the BIOS (
DIMM Status
of the applicable DIMM
indicates the capacity). (Refer to
Chapter 2 (1. Details of System BIOS)
in "
Maintenance Guide
".)
9. If an OS has been installed, change the paging file size.
If your OS is Windows, refer to “
Installation Guide (Windows)
”.
Notch
Key
