NEC Express5800/320Ma, Руководство по установке и настройке программного обеспечения

Страница: 26 / 86

The Post-IPL Procedure
2-10 Express5800/320Ma: Software Installation and Configuration Guide
has restarted. This is normal behavior while the virtual
mouse and keyboard are found by the operating system
as new hardware. Responsiveness returns after a short
period of time.
Completing the Post-IPL Procedure
1. When the Welcome to Windows dialog box appears, press CTRL+ALT+DELETE.
2. Log on by using the Administrator account and password you entered during
Mini-Setup and click OK.
3. Two separate end-user licensing agreements (EULAs) appear:
a. Select the appropriate language for the Express5800/320Ma EULA. If you
display the EULA, review it, and then click Close. Click I accept the terms of
the license agreement if you agree to the terms, and then click Continue.
b. Select whether you want to display the Microsoft Quick-Fix Engineering EULA
Addendum. If you display the EULA, review it, and then click Close. Click I
accept the terms of the license agreement if you agree to the terms, and
then click Continue.
4. The installation programs for third-party software run. Be sure to install the
following software, as NEC Solutions (America), Inc. does not support systems that
lack this software.
•
When the Java Runtime Environment Wizard starts, follow the prompts to
install JRE, accept the license agreement and the default settings in the
remaining dialog boxes. (The JRE Setup dialog box may become partially
obscured by the progress bars. Click the dialog box to bring it forward.)
C A U T I O N
!
If the Setup Complete dialog box for any third-party
software appears, click No, I will restart my computer
later, and then click Finish. If you restart the system now,
the installation does not complete properly.
5. When Setup displays the IPL Completed dialog box, click Restart.
6. Restore the default BIOS settings to enable boot monitoring and, optionally, to
enable Option ROM on the PCI slots. While the system is booting, press F2 to enter
the BIOS Setup program. In the BIOS Setup program, press F9 to restore the
default settings, then press F10 to exit from the BIOS Setup program. You must
enable boot monitoring to maintain fault tolerance.