NEC Express5800/320Fc-LR/MR, Руководство по установке

Страница: 128 / 132

6-18 Troubleshooting
Problems with System Repai r
“Press F6 if you need to install a third party SCSI or RAID driver…” was not displayed and
there was no chance to enter
F5
and
F6
when “When starting Recovery Console from Windows
Server 2003 CD-ROM” was performed.
 Did you press any key when the message “Press any key to boot from CD” is displayed on
top of the screen?

Start-up from Windows Server 2003 CD-ROM is required to start the Recovery Console
from Windows Server 2003 CD-ROM. Press any key while the message “Press any key
to boot from CD” is displayed on the screen. You cannot start the Recovery Console from
the CD-ROM unless the any key is pressed while the message is being displayed. Restart
the system when it does not start from CD-ROM and the message “Press F6 if you need
to install a third party SCSI or RAID driver…” is not displayed. See “
Starting up
Recovery Console ” in “ SYSTEM REPAIR ” in this chapter to start again.
The screen turns out to be black for a while when booting the Recovery Console.

If you start the Recovery Console that is installed in the system, the screen turns out to be
black for a while when booting the Recovery Console. Since the system is normally
working, please wait for a while.
When the system’s update is being processed, Operating System Stop Error occurred at the
system reboot.

During the system update process, the message “Windows-FT Orphaning A disk that is
part of a fault–tolerant volume can no longer be accessed” is displayed, and there is
sometimes a case that OS Stop Error occurs on a reboot after this process. See
IMPORTANTof step 5 in “Updating the System” in this chapter when OS Stop Error
occurs, and reboot the system. In addition, the system’s update is successfully being
performed when the message “Windows-FT Orphaning A disk that is part of a fault-
tolerant volume can no longer be accessed” is displayed. However, the mirroring of HDD
is not applied. Make sure to check the hard disk’s mirroring after the system start-up.