Express5800/120Ed Rack Mount installation Procedures 24
Connecting the Power Cord
Plug the female end of the AC power cord into the input receptacle on the rear
of the power supply cage. Plug the male end of the power cord into NEMA 5-
15R outlet for 100-120 VAC or NEMA 6-15R outlet for 200-240 VAC.
If the power cord supplied with the system is not compatible with the AC wall
outlet in your region, obtain a suitable power cord that meets the following
criteria.
!
The power cord must be rated for the available AC voltage and have a
current rating that is at least 125% of the current rating of the system.
!
The power cord connector that plugs into the wall outlet must be terminated
in a grounding-type male plug designed for use in your region. It must have
certification marks showing certification by an agency acceptable in your
region.
!
The power cord connector that plugs into the system must be an IEC- type
CEE-22 female connector.
!
The power cord must be less than 1.8 meters (6.0 feet) long.
When connecting the power cord to a power control unit such as an UPS,
confirm that the power control unit is powered off. Connecting the power cord
while power is supplied to the power control unit may cause a failure.
!
WARNING
Your system shipped with a power cord for the power
supply. Do not attempt to modify or use the supplied AC
power cord if it is not the exact type required.
Содержание Express 5800/120Ed
Страница 1: ...Express5800 120Ed Rack Mount Kit Installation Procedures PN 455 01607 001 ...
Страница 4: ......
Страница 28: ......
Страница 29: ......