NEC Express 320Lc Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 145

NEC Express 320Lc Скачать руководство пользователя страница 61

Windows Setup

4-17

6. “Important 1” message will appear.

Read the message and follow the instructions.

7. “Important 2” message will appear.

Read the message and follow the instructions.

8. “Important 3” message will appear.

Read the message and follow the instructions.

*** Important Notice 1
- No optional boards should be installed in the PCI modules at this

time. If there are optional boards installed in the PCI modules,
please abort the installation process, power down the system
and remove the optional boards. Afterwards power on the system and
restart the intallation process.
Caution: The installation process will not complete properly if
there are optional boards installed in the PCI modules.

Do you want to continue the installation [Y,N]?

*** Important Notice 2
- Only the first Hard Disk Drive (slot 1 of the active PCI module)

should be inserted.
If there is more than one Hard Disk Drive inserted in the active PCI
module, please abort the installation process, power down the system
and remove all Hard Disk Drives except for the Hard Disk Drive
inserted into slot 1 of the active PCI module.
Caution: If you continue installing with multiple Hard Disk Drives

inserted, the installation process may not be able to
properly determine the system drive and incorrect installation
and/or loss of data may result.

Do you want to continue the installation [Y,N]?

*** Important Notice 3
- Confirm that there are no optional SCSI devices

such as tape devices connected to the external rear SCSI
connectors
If there are optional SCSI devices connected to the external rear
SCSI connectors, terminate the installation process and remove the
devices, and then restart the installation process.
Caution: When optional SCSI devices are connected to the external

rear SCSI connectors, the installation process will not
complete properly.

Do you want to continue the installation[Y,N]?

«
...
59
60
61
62
63
...
»

Содержание Express 320Lc


















































































































































Отзывы:

Нет отзывов