NEC ES1400, Руководство пользователя, Страница: 163 / 188

Emergency Management Port Console C-15
Sensor Type Codes
The Sensor Type Code Table provides information regarding:
„
The type of sensor generating the SEL entry
„
The name of the sensor
„
The microcontroller which initiated the SEL entry
„
The warning or error which initiated the SEL entry.
Using the Sensor Type Code Table
Compare the Sensor Type and Number message shown in the SEL
viewer display (above) to the Sensor Type/Number in Verbose column in
the table below. Using information in the
Sensor Name column in the
table you can determine the physical component which generated the
SEL message. The
Generator ID column in the table identifies the
microcontroller which reported the event to the SEL. Detailed
information regarding the event is available from the
Event Description
column in the SEL Viewer.
For example, if there is a Fan #10 entry in the Sensor Type and Number
column of the SEL Viewer, by looking at the Sensor type Codes table
you can determine that the Baseboard Fan 1 caused this entry. The
entry was reported through the Baseboard Management Controller
(BMC) on the system board.
Sensor Type Codes
Sensor Type and Number in
Verbose Sensor Name Generator ID
Reserved 00h BMC
Temperature #17 Processor1 Temp BMC
Temperature #18 Processor2 Temp* BMC
Temperature #19 Baseboard Temp1 BMC
Temperature #1A Baseboard Temp2 BMC
Voltage # 01 Baseboard 5V BMC
Voltage # 02 Baseboard 3.3V BMC
Voltage # 03 Primary Processor BMC
Voltage # 04 Secondary Processor* BMC
Voltage # 05 Processor 2.5V BMC
*Not applicable to all servers