NEC ES1400, Руководство пользователя, Страница: 158 / 188

C-10 Emergency Management Port Console
„
Serial Line - must be filled out when the line selection is set to
Direct connect (Serial Line).

Baud Rate - must be 19200 for EMP to connect properly.

COM Port No. - set the COM Port number to which the null
modem serial cable is connected.
„
Connect - initiates connection to the connected server. When this
button is clicked, you are prompted for the EMP password.
„
Config - displays the Phonebook dialog.
„
Cancel - exits the Connect dialog without any action taken.
„
Help - displays dialog level help information.
Power On/Off
Selecting Power On/Off from the Action menu allows you to power the
server on or off, with post-power-up options. It generates the Power
on/off dialog.
Power On/Off Dialog
Options available in the dialog are:
„
Power ON - powers on the server.
„
Power OFF - powers off the server. This option is not allowed if the
server is configured in RESTRICTED mode for EMP operations.
„
Post-power-up option - sets the mode selection of the server to EMP
active or BIOS redirection. The setting is available after the next
power-up. The default selection is EMP active.
„
Cancel - exits the dialog without any action taken.
„
Help - displays dialog level help information.