NEC ElectraElite 48, Руководство по аппаратному обеспечению системы

Страница: 234 / 435

Electra Elite Issue 6
System Hardware Manual 5 - 97
5.10.3 Switch Settings
Refer to Table 5-46 VMS(2)/(4)/(8)-U( ) ETU Switch Settings
for Revision Q26031 v 6.65.
For Revision Q05631 v 6.68 or Higher, refer to Table 5-47
VMS Dip Switch Functions .
Table 5-46 VMS(2)/(4)/(8)-U( ) ETU Switch Settings
Switch Description
1 Normally Off
On to enable COM1
2 Normally Off
When 1 and 2 are both On, COM1 is enabled
for HOSTKEY and the VM application is
stopped for Maintenance
3 On to enable COM2 for remote RS-232/RJ-11
Off to allow COM1 local connection
4 Utility Menu
Table 5-47 VMS Dip Switch Functions
DIP
1
DIP
2
DIP
3
DIP
4
Description
ON To enable HostKey and run Manufacturing Test
(NEC Production only
ON ON To enable HostKey with floppy disk redirection and
run Manufacturing Test (NEC Production only
ON To connect to CoSession using modem instead of
direct cable connection
ON To start BRU Host with direct cable connection
ON ON To start BRU Host with modem connection
ON ON To connect to CoSession using direct cable
connection but not start voice mail software
(Troubleshooting or Maintenance Mode)
Used for Revision Q05631 v 6.68 or Higher