NEC ELECTRA ELITE IPK II, Руководство по программированию

Страница: 453 / 617

Document Revision 1 Electra Elite IPK II
2 - 418 Program 47 : In-Mail
Description
Use
47-02:
IPK II In-Mail
Station Mailbox Options
to set up a station’s (extension’s)
mailbox. Station mailboxes are automatically assigned as Subscriber Mailboxes.
Normally, IPK II In-Mail Station Mailbox numbers 1~26 should correspond to
extensions 101~126.
Station Mailboxes are one of three mailbox categories: Station, Routing, and Master.
You can also set up Master Mailboxes as Subscriber Mailboxes.
Program 47 : In-Mail
47-02 : IPK II In-Mail Station Mailbox Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
01 Mailbox Active
(Mailbox Active)
Use this option to enable or disable the mailbox. An
extension’s mailbox is not accessible when it is
disabled (even though its stored messages and
configuration are retained in memory.) If disabled, a
user pressing Message initiates a remote logon and
is asked to enter their mailbox number. A voice
prompt then announces, “That mailbox does not
exist.”
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
0 (No = Disabled)
1 (Yes = Enabled)
Mailboxes 1~8 = 1
(Enabled)
All Other
Mailboxes = 0
(Disabled)
02 Mailbox Number
(Mailbox Number)
Use this option to select the extension number
associated with the mailbox you are programming.
Normally, mailbox 1 should use Mailbox Number
101, mailbox 2 should use Mailbox Number 102, etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
Digits (8 maximum,
using 0~9) Mailboxes 1~8 =
101~108.
For all other
mailboxes, there is
no entry.