NEC ELECTRA ELITE IPK II, Руководство по программированию

Страница: 149 / 617

Document Revision 1 Electra Elite IPK II
2 - 114 Program 15 : Extension, Basic Setup
06 Extension Polarity Reverse
-- Not Used in U.S. --
Do Not Change Default Entry as DTMF issues
may arise with voice mail.
0 = Disable
(Off)
1 = Enable
(On)
0
07 Enabled On-Hook When Holding (SLT) 0 = No
1 = Yes
1 11-12-45
08 Answer On-Hook when Holding (SLT) 0 = Disable
(No)
1 = Yes
(Enable)
1 11-12-46
09 Caller ID Function - For External Module
Enable (1) or disable (0) the Caller ID FSK signal
for an external Caller ID module or a 3rd party
vendor telephone with Caller ID display.
Important:
If voice mail is used, this setting must be
disabled or the system integration codes for
disconnect will be incorrect.
With some earlier software, if a 2500 set (no
Caller ID) is installed, this must be set to “0”
or else incoming callers will not have a talk
path.
0 = Disable
(Off)
1 = Enable
(On)
0
10 Caller ID Name
Determine if an extension user’s telephone
should display the Caller ID name.
0 = Disable
1 = Enable
1 15-03-09
11 Caller ID Type
Determine whether the Caller ID type is FSK or
DTMF.
0 = FSK
1 = DTMF
0
12 --- Not Used ---
13 --- Not Used ---
14 Forwarded Caller ID Display Mode
Determine what the display shows when a
multiline terminal receives a forwarded outside
call.
0 = Calling
Extensio
n
Number
(Calling)
1 = External
Caller ID
(Forward)
0
15 Disconnect without dial after hooking hold
Determine whether or not to disconnect a held
call when on-hook without any dialing after
hooking-hold.
0 = Normal
1 = Disc.
0
Item
No
Item Input Data Default
Related
Program